DIN 914 Socket Set Screws, Cone Point
We supply DIN 914 cone point socket set screws in self colour high-strength steel, property class 45H (commonly called grade 14.9), and A2/A4 stainless steel, from M2 to M24. The cone point seats into a drilled dimple or bites directly into the shaft, giving positive location and strong resistance to movement.
Also known as: grub screw, socket set, set screw, headless, socket grub screw, cone point grub screw.
DIN 914 dimensions
| Diameter | Pitch | Key size |
|---|---|---|
| M3 | 0.5mm | 1.5mm |
| M4 | 0.7mm | 2.0mm |
| M5 | 0.8mm | 2.5mm |
| M6 | 1.0mm | 3.0mm |
| M8 | 1.25mm | 4.0mm |
| M10 | 1.5mm | 5.0mm |
Is DIN 914 the same as ISO 4027?
DIN 914 and ISO 4027 both cover cone point hexagon socket set screws. The standards are closely related, although dimensional or technical differences may exist. If your drawing specifies either designation, send us the requirement and we can identify the appropriate product.
What is a cone point set screw used for?
Permanent or semi-permanent settings - the point seats into a drilled dimple in the shaft for positive location and strong resistance to movement, holding collars, knobs and levers where they were set.
Is DIN 914 available in stainless steel?
Yes - DIN 914 cone point set screws are available in A2 and A4 stainless steel across a wide range of metric sizes, alongside high-strength steel, property class 45H (commonly called grade 14.9), self colour.
Need DIN 914 in a non-standard size or material?
Send us your drawing — specials quoted within 24 hours.