JCP Sleeve Anchors, Hexagon Flange Nut

8 - 20mm dia. (40 - 150mm) Carbon steel, zinc and yellow plated

We supply JCP hexagon flange nut sleeve anchors in zinc and yellow plated steel from 8mm to 20mm diameter, lengths 40mm to 150mm. The thin-walled expansion sleeve spreads the load, which lets sleeve anchors work in brickwork, stone and dense concrete blocks as well as non-cracked concrete. Supplied pre-assembled with a flange nut and washer for rapid through-fixing.

Also known as: sleeve anchor, sleeve bolt, flange nut sleeve anchor.

Hex flange nut sleeve anchor dimensions

Drill diameter (d0)	Order code	Length (L)	Max fixture thickness	Min hole depth (h1)	Installation torque (Nm)
8 mm	SLN08040	40 mm	5 mm	35 mm	10
8 mm	SLN08065	65 mm	30 mm	40 mm	10
8 mm	SLN08085	85 mm	45 mm	40 mm	10
10 mm	SLN10050	50 mm	5 mm	45 mm	20
10 mm	SLN10075	75 mm	30 mm	45 mm	20
10 mm	SLN10100	100 mm	55 mm	45 mm	20
10 mm	SLN10125	125 mm	80 mm	45 mm	20
12 mm	SLN12060	60 mm	15 mm	50 mm	35
12 mm	SLN12075	75 mm	20 mm	60 mm	35
12 mm	SLN12100	95 mm	50 mm	60 mm	35
12 mm	SLN12125	125 mm	65 mm	60 mm	35
16 mm	SLN16065	65 mm	10 mm	60 mm	45
16 mm	SLN16110	105 mm	50 mm	65 mm	45
16 mm	SLN16150	150 mm	90 mm	65 mm	45
20 mm	SLN20080	80 mm	15 mm	70 mm	70
20 mm	SLN20110	110 mm	45 mm	70 mm	70
20 mm	SLN20150	150 mm	85 mm	70 mm	70

Materials & strength

Material & finish

Carbon steel, zinc and yellow plated, supplied pre-assembled with nut and washer.

Related specifications

Hex bolt sleeve anchor Countersunk sleeve anchor A4 stainless hex flange nut sleeve anchor

Frequently asked

Sleeve anchor or throughbolt - which should I use?

In sound, non-cracked concrete a throughbolt is normally the stronger, quicker fixing. The sleeve anchor's full-length expansion sleeve spreads the load over a larger area, so it is the better choice in brickwork, natural stone and dense concrete blocks where a wedge-type anchor could crush the base material.

What sizes do you keep?

We stock a wide range of the JCP sleeve anchor line. Send us your requirement and we will quote within 24 hours.

Need Hex flange nut sleeve anchor in a non-standard size or material?

Send us your drawing — specials quoted within 24 hours.

Send us your drawing