JCP Sleeve Anchors, Hexagon Bolt

8 - 16mm dia. (45 - 125mm) Carbon steel, zinc and yellow plated

We supply JCP hexagon bolt sleeve anchors in zinc and yellow plated steel from 8mm to 16mm diameter, lengths 45mm to 125mm. The hex bolt head gives a finished bolt-head appearance instead of a projecting stud and nut - otherwise it installs exactly like the flange nut pattern, pre-assembled, into concrete, brick, stone or dense blocks.

Also known as: hex bolt sleeve anchor, sleeve anchor bolt type.

Hex bolt sleeve anchor dimensions

Drill diameter (d0)	Order code	Length (L)	Max fixture thickness	Min hole depth (h1)	Installation torque (Nm)
8 mm	SLB08045	45 mm	2 mm	45 mm	10
8 mm	SLB08070	70 mm	25 mm	45 mm	10
8 mm	SLB08090	90 mm	45 mm	45 mm	10
10 mm	SLB10045	45 mm	5 mm	45 mm	20
10 mm	SLB10055	55 mm	15 mm	45 mm	20
10 mm	SLB10080	80 mm	30 mm	50 mm	20
10 mm	SLB10100	100 mm	50 mm	50 mm	20
12 mm	SLB12065	65 mm	5 mm	65 mm	35
12 mm	SLB12080	80 mm	20 mm	65 mm	35
12 mm	SLB12100	100 mm	40 mm	65 mm	35
12 mm	SLB12125	125 mm	65 mm	65 mm	35
16 mm	SLB16075	75 mm	5 mm	65 mm	45
16 mm	SLB16110	110 mm	40 mm	65 mm	45

Materials & strength

Material & finish

Carbon steel, zinc and yellow plated, supplied pre-assembled.

Related specifications

Hex flange nut sleeve anchor Countersunk sleeve anchor

Frequently asked

When is the hex bolt pattern the right pick?

Choose it where the finished fixing should look like a bolt head sitting on the fixture - handrail base plates and visible brackets are typical. Where the fixture will be removed and refitted, the flange nut pattern on a projecting thread is usually more convenient.

Need Hex bolt sleeve anchor in a non-standard size or material?

Send us your drawing — specials quoted within 24 hours.

Send us your drawing