JCP ETA Drop-In Anchors, Bright Zinc Plated
We supply JCP ETA-assessed drop-in anchors in bright zinc plated steel from M8 to M16, manufactured in Europe and listed by JCP for structural applications in non-cracked concrete, and for multiple-use non-structural applications in cracked and non-cracked concrete C20/25 to C50/60, with fire resistance loading. The assessed alternative to the standard zinc and yellow plated range.
Also known as: eta drop in anchor, approved drop in anchor.
ETA drop-in anchor dimensions
| Internal thread (M) | Order code | Drill diameter (d0) | Length (L) | Min hole depth (h1) | Internal thread length | Installation torque (Nm) |
|---|---|---|---|---|---|---|
| M8 | ADBM08 | 10 mm | 30 mm | 30 mm | 13 mm | 8 |
| M10 | ADBM10 | 12 mm | 40 mm | 40 mm | 15 mm | 15 |
| M12 | ADBM12 | 15 mm | 50 mm | 50 mm | 18 mm | 35 |
| M16 | ADBM16 | 20 mm | 65 mm | 65 mm | 23 mm | 60 |
Materials & strength
Certification
European Technical Assessment ETA-24/0825, Option 7 (structural applications), and ETA-18/0213 (multiple-use, non-structural applications). Certificates are available on request.
Related specificationsWhen does a drop-in need to be the ETA range?
Where the fixing is specified against an assessment - suspended services under soffits, or wherever the engineer calls for an assessed anchor. The structural assessment covers non-cracked concrete; cracked concrete is covered under the multiple-use non-structural assessment. For general unassessed sockets the standard range is the economical choice.
Need ETA drop-in anchor in a non-standard size or material?
Send us your drawing — specials quoted within 24 hours.