JCP ETA Lipped Drop-In Anchors, Bright Zinc Plated
We supply JCP ETA-assessed lipped drop-in anchors in bright zinc plated steel from M8 to M12, including 25mm short-embedment versions - the assessed lipped line for level runs of suspended fixings - listed by JCP for structural applications in non-cracked concrete and multiple-use non-structural applications in cracked and non-cracked concrete, with fire resistance loading.
Also known as: eta lipped drop in, approved lipped drop in.
ETA lipped drop-in anchor dimensions
| Internal thread (M) | Order code | Drill diameter (d0) | Length (L) | Min hole depth (h1) | Internal thread length | Installation torque (Nm) |
|---|---|---|---|---|---|---|
| M8 | ADBM0825SH | 10 mm | 25 mm | 25 mm | 12 mm | 8 |
| M8 | ADBM0830SH | 10 mm | 30 mm | 30 mm | 13 mm | 8 |
| M10 | ADBM1025SH | 12 mm | 25 mm | 25 mm | 12 mm | 15 |
| M10 | ADBM1030SH | 12 mm | 30 mm | 30 mm | 13 mm | 15 |
| M10 | ADBM1040SH | 12 mm | 40 mm | 40 mm | 15 mm | 15 |
| M12 | ADBM1225SH | 15 mm | 25 mm | 25 mm | 12 mm | 35 |
| M12 | ADBM1250SH | 15 mm | 50 mm | 50 mm | 18 mm | 35 |
Materials & strength
Certification
European Technical Assessment ETA-24/0825, Option 7 (structural applications), and ETA-18/0213 (multiple-use, non-structural applications). Certificates are available on request.
Related specificationsWhich lipped range does a specified job need?
If the fixing schedule calls for an assessed anchor, use this ETA range; the standard lipped range covers general work. Both share the lip's fixed setting depth - the difference is the assessment scope - structural applications in non-cracked concrete, multiple-use non-structural applications in cracked and non-cracked concrete, and fire resistance loading listed by JCP.
Need ETA lipped drop-in anchor in a non-standard size or material?
Send us your drawing — specials quoted within 24 hours.