The Stainless Steel Heavy Duty Anchor is a high performance anchor with a three part expansion sleeve allowing for smaller spacings and edge distances.
The plastic compression ring ensures the clamping of the mounted piece to the work surface.
Product Information
An A4 stainless steel, torqued controlled through fixing suitable for use in cracked and non cracked concrete range between C20/25 & C50/60.
Features
Through Fixing
Heavy Duty Loads
Torque controlled expansion
Option 1 European technical approval
Supplied pre assembled for rapid installation
| Part Number | Thread Dia. | Anchor Length | Drill Hole Dia. | Max Fixture Thickness | Fixture Clearance Hole | Embedment Depth | Minimum Hole Depth | Structure Thickness | Nut across flats | Installation Torque |
| SLB12/10SS | 8mm | 87mm | 12mm | 10mm | 14mm | 70mm | 80mm | 125mm | 13mm | 30Nm |
| SLB12/30SS | 8mm | 107mm | 12mm | 30mm | 14mm | 70mm | 80mm | 125mm | 13mm | 30Nm |
| SLB14/15SS | 10mm | 108mm | 15mm | 15mm | 17mm | 85mm | 95mm | 145mm | 17mm | 50Nm |
| SLB14/25SS | 10mm | 118mm | 15mm | 25mm | 17mm | 85mm | 95mm | 145mm | 17mm | 50Nm |
| SLB18/10SS | 12mm | 117mm | 18mm | 10mm | 20mm | 95mm | 105mm | 165mm | 19mm | 80Nm |
| SLB18/20SS | 12mm | 127mm | 18mm | 20mm | 20mm | 95mm | 105mm | 165mm | 19mm | 80Nm |
| SLB18/40SS | 12mm | 147mm | 18mm | 40mm | 20mm | 95mm | 105mm | 165mm | 19mm | 80Nm |
